Most Wanted

Toilet Flapper Gone Bad

Old or worn-out toilet flappers (e.g., valve seal) can cause leaks. Flappers are inexpensive rubber parts that can build up minerals or decay over time. Replacing them can be a quick and easy fix for your water woes. To fix this leak, consult your local hardware store, home improvement retailer, or licensed plumber.

Leaky Faucet

Old and worn faucet washers and gaskets frequently cause leaks in faucets. A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. That’s the amount of water needed to take more than 180 showers! While these kinds of leaks may seem small, the water loss certainly adds up.

Old Showerhead

A showerhead leaking at ten drips per minute wastes more than 500 gallons per year. That’s the amount of water it takes to wash 60 loads of dishes in your dishwasher. Some leaky showerheads can be fixed by making sure there is a tight connection between the showerhead and the pipe stem and by using pipe tape to secure it. Pipe tape, also called Teflon tape, is available at most hardware stores, is easy to apply, and can help control leaks. For more complicated valve leaks in showers that drip when not in use, contact an experienced handyperson or licensed plumber.

Broken Sprinkler Head

Examine points where the sprinkler heads connect to pipes or hoses. If water pools in your landscape or you have large wet areas, you could have a leak in your system. A leak about as small as the tip of a ballpoint pen (or 1/32nd of an inch) can waste about 6,300 gallons of water per month. For those with an in-ground irrigation system, it is best to check it each spring before use to make sure it wasn’t damaged by frost, freezing, or physical contact. If you need help, hire an irrigation professional certified by a WaterSense labeled program to inspect it for you. These professionals have passed a certification program focused on water efficiency. They will not only help you detect and correct leaks in the system, but also maximize its efficiency.

Out-of-control Irrigation System

If every home in the United States with an automatic sprinkler system installed and properly operated a WaterSense labeled controller, we could save $435 million in water costs and 120 billion gallons of water across the country annually from not overwatering lawns and landscapes. That’s equal to the annual household water needs of nearly 1.3 million average American homes. Residential outdoor water use in the United States accounts for more than 9 billion gallons of water each day, mainly for landscape irrigation. Experts estimate that as much as 50 percent of this water is wasted due to overwatering caused by inefficiencies in irrigation methods and systems. Irrigation control technologies can significantly reduce overwatering by applying water only when plants need it. Replacing a standard clock timer with a WaterSense labeled irrigation controller can save an average home nearly 8,800 gallons of water annually.