
Roanoke Council Unanimously Approves Roanoke Ranch Zoning on SH 114
Roanoke's council unanimously approved Nov. 17 zoning for about 70 acres along SH 114, with a condition barring assisted living, Community Impact reported.
Roanoke's City Council unanimously approved a zoning amendment Tuesday, Nov. 17, for a mixed-use project of about 70 acres along State Highway 114 and Briarwyck Parkway, Caleb Gottry of Community Impact reported. The paper said the project is called Roanoke Ranch, a rebranding of Slaughter Ranch. Official city records still use the Slaughter Ranch planned-development name.
Minutes of the Nov. 17 meeting had not been posted as of Nov. 20, so the unanimous vote, and a condition attached to it, come from Community Impact, not from an official minute book. The city's agenda for the 7 p.m. meeting at City Hall, 500 S. Oak Street, listed the request as old business. The applicant on the agenda is BLW FLP Real Property LLC. The case is ZTA-2026-08, Ordinance No. 2026-153, covering about 70.119 acres in Planned Development 2000-124. Community Impact rounded the tract to 70.1 acres.
Gottry reported that the motion passed with one condition: the project would not include an assisted-living facility that had appeared in earlier plans. A draft of the ordinance in the Nov. 17 agenda packet, assembled before the meeting, still listed an assisted-living facility of limited size as an additional permitted use. Signature lines on that draft for the mayor, the city secretary, and the city attorney were blank. Official minutes that would show whether the council changed that permitted-use list have not been posted, so the difference between the paper's account of the condition and the pre-meeting draft is noted here, not resolved.
Community Impact identified Austin Pipkin as Pelican Industrial's market leader for Texas. Official minutes of the Oct. 27 council meeting, included in the same Nov. 17 packet, record Pipkin as the person who presented the request.
The posted development standards, attached as Exhibit B, describe an integrated mix of retail — including large-format retail or wholesale stores of more than 90,000 square feet, which may operate on a membership basis — along with restaurants, offices, services, showrooms, and office-warehouse or flex space. The standards require at least 50 acres to be set aside for retail. That 50-acre retail figure also appears in the Oct. 27 minutes, where Pipkin told the council 50 acres would be dedicated to retail, and in conditions the Planning and Zoning Commission recommended on Oct. 19.
Where the property meets a residential zoning district, buildings must sit at least 65 feet back from the property line, the ordinance says. The developer must keep a barrier of masonry and trees at least 8 feet high along the northern line of the center development parcel. Hooded curbs on the west and east parcels are required to send truck traffic south, away from the neighboring homes, and wayfinding signs are required to keep trucks from entering that district from the south. The developer must also produce a photometric study, following city guidelines, to limit lighting effects on nearby houses, and lighted signs are barred on building sides that sit within 125 feet of a residential district.
Pipkin told the council in October that the west warehouse would be 88,000 square feet and the east building 98,000 square feet, and that both would mix flexible office and warehouse space, Cody Thorn of Community Impact reported after the Oct. 27 meeting. Those building sizes are not stated in the posted ordinance. At the November meeting, Gottry reported, Mayor Carl E. "Scooter" Gierisch Jr. described the two warehouse buildings as each staying below 100,000 square feet, unlike larger projects nearby by firms such as Hillwood.
Gottry wrote that Pelican did not put multifamily housing in this plan, a point the mayor commended. After the Oct. 27 meeting, Thorn quoted Gierisch as saying, "the resounding feedback I've gotten is multifamily needs to stop in North Texas and it did on this project."
The public hearing opened at 7:11 p.m. on Oct. 13 and was carried forward, the Oct. 27 minutes say. On Oct. 19, the Planning and Zoning Commission recommended approval with 15 conditions, among them the 65-foot rear setback, an eight-foot masonry wall and an eight-foot evergreen tree line, a ban on standalone automotive uses unless they are tied to other retail, a lighting study, a construction-hours plan, and a bar on lighted rear signage. On Oct. 27, Mayor Pro Tem Holly Gray moved, and Council Member Brian Darby seconded, to continue the hearing to Nov. 17 so the proposed ordinance could be amended and brought back. The motion carried unanimously. City Attorney Jeff Moore had told the council the ordinance would need to return once the amendments were written.
Four residents spoke at the October hearing, the minutes say: Wyatt Hall, Melissa Aulds, Janeil McCandless, and Julian Juarez. They raised concerns about property values, added traffic, the kinds of businesses that might locate there, and hydrologic studies. According to the minutes, about 400 people signed a petition favoring the project so long as community input and conditions were part of it.
The same Oct. 27 meeting postponed, also unanimously, three Oak Street items involving ground-floor housing and live-work units, after the applicants asked the council to wait until an Oak Street master plan is approved. Dock Line previously reported on that separate Oak Street zoning question before the October meeting. It is not the highway tract approved in November.
The city's website and the official agenda list City Hall at 500 S. Oak Street, Roanoke, Texas 76262. The U.S. Census Bureau's address geocoder returns the same ZIP code for that street address.


